Availability: | |
---|---|
Quantity: | |
IPS-LF30H
IPS
Portable Handheld Fiber Laser Marking Machine IPS-LF30 H
Fiber laser marking is a technique which uses computer-controlled laser beam to leave permanent mark on the surface of various kinds of object. The working principle of fiber laser marking machine is to use light amplication to cause chemical effect or burn part of the material to mark letters, symbols, bar codes, and other graphics on an object.
Fiber laser marking machine is mainly composed fiber laser, laser scanning galvanometer and controller. The fiber laser has the advantages of small size, high quality beam, no maintenance and etc. The output center wavelength of fiber laser is 1064 nm and the life time is around 100,000 hours. Compared with other king of laser, fiber laser has a longer life time.
Advantages
1. Can mark both metallic and nonmetallic material, especially those material with high hardness, high melting point or brittle material.
2. High processing speeds, low operation cost, constant high quality and durability of the results, high flexibility in automation. Laser marking is a perfect choice for mass production.
3. Laser marking is non contact type of marking so it doesn’t produce stress on the materials. It will not alter the physical properties of the materials processed.
4. Laser is clean and safe process as it is chemical-proof, water-proof, oil, grease & fuel proof.
5. As the laser beam spot size (after focusing) is small, the heat-affected zone is much smaller, thus allowing it to achieve fine processing that other conventional methods cannot.
6. Laser Marking is a flexible process as one can mark texts, alphanumeric, logos, bar codes, graphics, images, 2D data matrix code, etc.
7. It is a user-friendly and cost effective marking solution as virtually no consumables.
8. Laser marking enhances the aesthetical & monetary value of products by making it more attractive & eye catching.
Specification
Material | Engineering Plastics | ||
Laser Gun Model | Fiber Laser Generator | ||
Laser Power | ≥20W | ≥30W | |
Laser Wavelength | 1064nm | ||
Scanning Method | High-precision two-dimensional scanning system | ||
Marking Speed | ≤7000mm/s | ||
Main Control | Highly integrated motherboard with built-in 7-inch touch screen | ||
Operating System | Linux | ||
Cooling system | Air cooling | ||
Type of drawings | Both dot matrix and vector | ||
Reflector size | Standard:8.5mm | ||
Marking field | 50mm×50mm(Standard) \ 100mm×100mm | ||
Positioning method | Red Light with Outline Indication | ||
Lines of marking | Any line within the marking field | ||
Line Speed | 650 characters/sec(according to the material and contents) | ||
Language | Simplified Chinese, Traditional Chinese, English, Korean, Russian, Arabic numerals and other standard fonts | ||
File Format | BMP/DXF/HPGL/JPEG/PLT | ||
Barcode/QR code | CODE39、CODE128、CODE126、EAN13、PDF417、01CODE、QR、AZTECCODE、DM、GS1DM、 DOTCODE、HANXINCODE... | ||
Power Supply | 220V | ||
Maximum Power Consumption | ≤200W | ≤300W | |
Weight | 10KG | 10KG | |
Overvoltage Category | Ⅱ | ||
Working Environment Temperature | 0-40℃ | ||
Working Environment Humidity | 30 -85 RH (No condensation) |
PRINTING SAMPLE SHOW
SAMPLE1
SAMPLE2
SAMPLE3
SAMPLE4
Portable Handheld Fiber Laser Marking Machine IPS-LF30 H
Fiber laser marking is a technique which uses computer-controlled laser beam to leave permanent mark on the surface of various kinds of object. The working principle of fiber laser marking machine is to use light amplication to cause chemical effect or burn part of the material to mark letters, symbols, bar codes, and other graphics on an object.
Fiber laser marking machine is mainly composed fiber laser, laser scanning galvanometer and controller. The fiber laser has the advantages of small size, high quality beam, no maintenance and etc. The output center wavelength of fiber laser is 1064 nm and the life time is around 100,000 hours. Compared with other king of laser, fiber laser has a longer life time.
Advantages
1. Can mark both metallic and nonmetallic material, especially those material with high hardness, high melting point or brittle material.
2. High processing speeds, low operation cost, constant high quality and durability of the results, high flexibility in automation. Laser marking is a perfect choice for mass production.
3. Laser marking is non contact type of marking so it doesn’t produce stress on the materials. It will not alter the physical properties of the materials processed.
4. Laser is clean and safe process as it is chemical-proof, water-proof, oil, grease & fuel proof.
5. As the laser beam spot size (after focusing) is small, the heat-affected zone is much smaller, thus allowing it to achieve fine processing that other conventional methods cannot.
6. Laser Marking is a flexible process as one can mark texts, alphanumeric, logos, bar codes, graphics, images, 2D data matrix code, etc.
7. It is a user-friendly and cost effective marking solution as virtually no consumables.
8. Laser marking enhances the aesthetical & monetary value of products by making it more attractive & eye catching.
Specification
Material | Engineering Plastics | ||
Laser Gun Model | Fiber Laser Generator | ||
Laser Power | ≥20W | ≥30W | |
Laser Wavelength | 1064nm | ||
Scanning Method | High-precision two-dimensional scanning system | ||
Marking Speed | ≤7000mm/s | ||
Main Control | Highly integrated motherboard with built-in 7-inch touch screen | ||
Operating System | Linux | ||
Cooling system | Air cooling | ||
Type of drawings | Both dot matrix and vector | ||
Reflector size | Standard:8.5mm | ||
Marking field | 50mm×50mm(Standard) \ 100mm×100mm | ||
Positioning method | Red Light with Outline Indication | ||
Lines of marking | Any line within the marking field | ||
Line Speed | 650 characters/sec(according to the material and contents) | ||
Language | Simplified Chinese, Traditional Chinese, English, Korean, Russian, Arabic numerals and other standard fonts | ||
File Format | BMP/DXF/HPGL/JPEG/PLT | ||
Barcode/QR code | CODE39、CODE128、CODE126、EAN13、PDF417、01CODE、QR、AZTECCODE、DM、GS1DM、 DOTCODE、HANXINCODE... | ||
Power Supply | 220V | ||
Maximum Power Consumption | ≤200W | ≤300W | |
Weight | 10KG | 10KG | |
Overvoltage Category | Ⅱ | ||
Working Environment Temperature | 0-40℃ | ||
Working Environment Humidity | 30 -85 RH (No condensation) |
PRINTING SAMPLE SHOW
SAMPLE1
SAMPLE2
SAMPLE3
SAMPLE4
content is empty!
Guangzhou Prima Technology Co., Ltd is located in Guangzhou science city. We have been engaged in design and manufacturer of inkjet printer, laser marking machine and corollary equipment for more than 12 years.